bis(2-ethylhexyl) adipate  Thermodynamic & Transport Properties
CAS Number
Name
Category
Pure Or Mix Name
English Full Name
Chemical Formula
Molecular Weight
Synonym bis(2-Ethylhexyl)adipate,Di-2-Ethylhexyl_Adipate,Di(2-C2C6)Adipate,Dioctyl_Adipate,Octyl_Adipate,Di(2-Ethylhexyl)adipate,Hexanedioic_Acid,_bis(2-Ethylhexyl)ester,Adipic_Acid_bis(2-Ethylhexyl)ester,Doa,Hexanedioic_Acid,_Dioctyl_Ester;Bis(2-ethylhexyl)adipat; Dioctyl Adipate; Bis(2-ethylhexyl) adipate; DEHA; Adipic Acid Dioctyl Ester; Adipic acid di(2-ethylhexyl) ester; Bis(2-ethylhexyl)adipate; Di(2-ethylhexyl) Adipate; bis(2-ethylhexyl) hexanedioate; Hexanedioic acid, bis(2-ethylhexyl) ester; Bis(2-ethylhexyl) Adipate;
Molecular Weight
Normal Boiling PointNormal Boiling Point
Critical Temperature Critical temperature
Acentric FactorAcentric Factor
Dipole Momentdipole moment
Heat of Formation J/mol
Heat of Combustion J/mol
Composition
bis(2-ethylhexyl) adipate :Introduction
Calculation Model :
Based on Mars Model
Temperature =
Pressure =
Specific Enthalpy =
Specific Entropy =
Reference
Please Login before calculating Loginor Register
bis(2-ethylhexyl) adipate :Thermodynamic & Transport Properties Calculated Result
Physical State:
Molecular Weight=
Celsius,Fahrenheit,Reaumur & Thermodynamic Temperature ConversionTemperature=
absolute pressure & gauge pressurePressure=
Density=
specific volumespecific volume=
Specific EnthalpySpecific Enthalpy=
Specific Entropy Specific Entropy =
Composition=



Saturated Vapor Pressure, boiling point (dew point), latent heat of vaporizationare are saturated properties, just enter One parameter to calculate them!
Saturated Vapor Pressure=
Boiling Point=
Latent Heat of VaporizationLatent Heat of Vaporization=
Specific Heat at Constant PressureSpecific Heat(Cp)=
Specific Heat(Cv)=
Adiabatic ExponentCp/Cv=
QualityVapor Quality=
Compression FactorCompression Factor=
Thermal conductivityThermal Conductivity=
Thermal Diffusion CoefficientThermal Diffusivity=
Kinematic ViscosityKinematic Viscosity=
Dynamic ViscosityDynamic Viscosity=
Surface TensionSurface Tension=
Prandtl NumberPrandtl Number=

Comment
Post your comment after login/register. LoginorRegister

View source
×