2-Methyl-2-(methylthio)propane  Thermodynamic & Transport Properties
CAS Number
Name
Category
Pure Or Mix Name
English Full Name
Chemical Formula
Molecular Weight
Synonym Methyl_t-C4Sulfide,Propane,_2-Methyl-2-(methylthio)-,Methyl_tert-Butyl_Sulfide,1,1-Dimethyl-1-(methylthio)ethane,Methyl_t-Butyl_Sulfide,3,3-Dimethyl-2-Thiabutane;t-butyl methyl sulfide; 2-thiabutane,3,3-dimethyl; Propane, 2-methyl-2-(methylthio)-; Methyl t-butyl sulfide; (CH3)3CSCH3; 3,3-Dimethyl-2-thiabutane; TERT-BUTYL METHYL SULPHIDE; tert-butyl methyl thioether; sulfure de tert-butyle et de methyle; tert-butylmethylsulfide; METHYL TERT-BUTYL SULFIDE; Sulfide,tert-butyl methyl;
Molecular Weight
Normal Boiling PointNormal Boiling Point
Critical Temperature Critical temperature
Acentric FactorAcentric Factor
Dipole Momentdipole moment
Heat of Formation J/mol
Heat of Combustion J/mol
Composition
2-Methyl-2-(methylthio)propane :Introduction
Single Value
Calculation Model ：
Based on Mars Model
Temperature =
Pressure =
Specific Enthalpy =
Specific Entropy =
Reference
Please Login before calculating Loginor Register
2-Methyl-2-(methylthio)propane :Thermodynamic & Transport Properties Calculated Result
Physical State:
Molecular Weight=
Celsius,Fahrenheit,Reaumur & Thermodynamic Temperature ConversionTemperature=
absolute pressure & gauge pressurePressure=
Density=
specific volumespecific volume=
Specific EnthalpySpecific Enthalpy=
Specific Entropy Specific Entropy =
Composition=



Saturated Vapor Pressure, boiling point (dew point), latent heat of vaporizationare are saturated properties, just enter One parameter to calculate them!
Saturated Vapor Pressure=
Boiling Point=
Latent Heat of VaporizationLatent Heat of Vaporization=
Specific Heat at Constant PressureSpecific Heat(Cp)=
Specific Heat(Cv)=
Adiabatic ExponentCp/Cv=
QualityVapor Quality=
Compression FactorCompression Factor=
Thermal conductivityThermal Conductivity=
Thermal Diffusion CoefficientThermal Diffusivity=
Kinematic ViscosityKinematic Viscosity=
Dynamic ViscosityDynamic Viscosity=
Surface TensionSurface Tension=
Prandtl NumberPrandtl Number=

Comment
Post your comment after login/register. LoginorRegister

View source
×