abietic acid  Thermodynamic & Transport Properties
CAS Number
Name
Category
Pure Or Mix Name
English Full Name
Chemical Formula
Molecular Weight
Synonym AbieticAcid;Abietic acid; 1-Phenanthrenecarboxylic acid, 1,2,3,4,4a,4b,5,6,10,10a-decahydro-1,4a-dimethyl-7-(1-methylethyl)-, [1R-(1-,4aα,4b-,10a-)]-; 7-isopropyl-1,4a-dimethyl-1,2,3,4,4a,4b,5,6,10,10a-decahydrophenanthrene-1-carboxylic acid; 7,13-Abietadien-18-oic acid; 1,1-Dimethyl-7-isopropyl-1,2,3,4-tetrahydro-phenanthren; Sylvic Acid; abieta-7,13-diene-18-oic acid; simonellite; ABIETIC ACID; abieta-7,13-dien-18-oic acid; 7-Isopropyl-1,1-dimethyl-1,2,3,4-tetrahydro-phenanthren; 7-isopropyl-1,1-dimethyl-1,2,3,4-tetrahydro-phenanthrene;
Molecular Weight
Normal Boiling PointNormal Boiling Point
Critical Temperature Critical temperature
Acentric FactorAcentric Factor
Dipole Momentdipole moment
Heat of Formation J/mol
Heat of Combustion J/mol
Composition
abietic acid :Introduction
Calculation Model :
Based on Mars Model
Temperature =
Pressure =
Specific Enthalpy =
Specific Entropy =
Reference
Please Login before calculating Loginor Register
abietic acid :Thermodynamic & Transport Properties Calculated Result
Physical State:
Molecular Weight=
Celsius,Fahrenheit,Reaumur & Thermodynamic Temperature ConversionTemperature=
absolute pressure & gauge pressurePressure=
Density=
specific volumespecific volume=
Specific EnthalpySpecific Enthalpy=
Specific Entropy Specific Entropy =
Composition=



Saturated Vapor Pressure, boiling point (dew point), latent heat of vaporizationare are saturated properties, just enter One parameter to calculate them!
Saturated Vapor Pressure=
Boiling Point=
Latent Heat of VaporizationLatent Heat of Vaporization=
Specific Heat at Constant PressureSpecific Heat(Cp)=
Specific Heat(Cv)=
Adiabatic ExponentCp/Cv=
QualityVapor Quality=
Compression FactorCompression Factor=
Thermal conductivityThermal Conductivity=
Thermal Diffusion CoefficientThermal Diffusivity=
Kinematic ViscosityKinematic Viscosity=
Dynamic ViscosityDynamic Viscosity=
Surface TensionSurface Tension=
Prandtl NumberPrandtl Number=

Comment
Post your comment after login/register. LoginorRegister

View source
×