2-Ethylhexyl acrylate  Thermodynamic & Transport Properties
CAS Number
Name
Category
Pure Or Mix Name
English Full Name
Chemical Formula
Molecular Weight
Synonym 2EthylHexylAcrylate;Octyl Acrylate Monomer; ETHOXY-2-ETHYLACRYLATE; ethylhexyl acrylate; OCTYL ACRYLATE MONOMER; 2-Ethylhexyl acrylate (2-EHA); Acrylic Acid 2-Ethylhexyl Ester Monomer; 2-propenoic acid 2-ethylhexyl ester; 2-ETHYLEXYL ACRYLATE; 2-Propenoic acid, 2-ethylhexyl ester; Acrylic Acid Octyl Ester Monomer; OCTYL ACRYLATE; 2-EHA; 2-ethyl; ETHYL-2-HEXYLACRYLATE; 2-ethyl-hexyl acrylate; 2-ethvlhexvlacrvlate; O-2-ethylhexyl acrylate; 2-ethylheksyl acrylate; 2-Ethylhexyl Acrylate Monomer; EHA;
Molecular Weight
Normal Boiling PointNormal Boiling Point
Critical Temperature Critical temperature
Acentric FactorAcentric Factor
Dipole Momentdipole moment
Heat of Formation J/mol
Heat of Combustion J/mol
Composition
2-Ethylhexyl acrylate :Introduction
Single Value
Calculation Model ：
Based on Mars Model
Temperature =
Pressure =
Specific Enthalpy =
Specific Entropy =
Reference
Please Login before calculating Loginor Register
2-Ethylhexyl acrylate :Thermodynamic & Transport Properties Calculated Result
Physical State:
Molecular Weight=
Celsius,Fahrenheit,Reaumur & Thermodynamic Temperature ConversionTemperature=
absolute pressure & gauge pressurePressure=
Density=
specific volumespecific volume=
Specific EnthalpySpecific Enthalpy=
Specific Entropy Specific Entropy =
Composition=



Saturated Vapor Pressure, boiling point (dew point), latent heat of vaporizationare are saturated properties, just enter One parameter to calculate them!
Saturated Vapor Pressure=
Boiling Point=
Latent Heat of VaporizationLatent Heat of Vaporization=
Specific Heat at Constant PressureSpecific Heat(Cp)=
Specific Heat(Cv)=
Adiabatic ExponentCp/Cv=
QualityVapor Quality=
Compression FactorCompression Factor=
Thermal conductivityThermal Conductivity=
Thermal Diffusion CoefficientThermal Diffusivity=
Kinematic ViscosityKinematic Viscosity=
Dynamic ViscosityDynamic Viscosity=
Surface TensionSurface Tension=
Prandtl NumberPrandtl Number=

Comment
Post your comment after login/register. LoginorRegister

View source
×