2-Chloro-1,1,1,2-tetrafluoroethane  Thermodynamic & Transport Properties
CAS Number
Name
Category
Pure Or Mix Name
English Full Name
Chemical Formula
Molecular Weight
Synonym 2Cl1112FC2;1-Chlor-1,2,2,2-tetrafluor-1-iod-ethan; 1-chloro-1,2,2,2-tetrafluoroethane; 1,1,1,2-tetrafluorochloroethane; 1-Chloro-1-iodotetrafluoroethane; Ethane, 1-chloro-1,2,2,2-tetrafluoro-; tetrafluorochloroethane; 1-chloro-1,2,2,2-tetrafluoro-1-iodo-ethane; tetrafluoromonochloroethane; 1,1,1,2-Tetrafluor-2-chlor-2-iod-ethan; 1-iodo-1-chlorotetrafluoroethane; 1.1.1.2-Tetrafluor-2-chlor-2-iod-aethan; 1,1,1,2-tetrafluoro-2-chloroethane; 1-Chlor-tetrafluor-1-iod-ethan; chlorotetrafluoroethane;
Molecular Weight
Normal Boiling PointNormal Boiling Point
Critical Temperature Critical temperature
Acentric FactorAcentric Factor
Dipole Momentdipole moment
Heat of Formation J/mol
Heat of Combustion J/mol
Composition
2-Chloro-1,1,1,2-tetrafluoroethane :Introduction
Calculation Model :
Based on Mars Model
Temperature =
Pressure =
Specific Enthalpy =
Specific Entropy =
Reference
Please Login before calculating Loginor Register
2-Chloro-1,1,1,2-tetrafluoroethane :Thermodynamic & Transport Properties Calculated Result
Physical State:
Molecular Weight=
Celsius,Fahrenheit,Reaumur & Thermodynamic Temperature ConversionTemperature=
absolute pressure & gauge pressurePressure=
Density=
specific volumespecific volume=
Specific EnthalpySpecific Enthalpy=
Specific Entropy Specific Entropy =
Composition=



Saturated Vapor Pressure, boiling point (dew point), latent heat of vaporizationare are saturated properties, just enter One parameter to calculate them!
Saturated Vapor Pressure=
Boiling Point=
Latent Heat of VaporizationLatent Heat of Vaporization=
Specific Heat at Constant PressureSpecific Heat(Cp)=
Specific Heat(Cv)=
Adiabatic ExponentCp/Cv=
QualityVapor Quality=
Compression FactorCompression Factor=
Thermal conductivityThermal Conductivity=
Thermal Diffusion CoefficientThermal Diffusivity=
Kinematic ViscosityKinematic Viscosity=
Dynamic ViscosityDynamic Viscosity=
Surface TensionSurface Tension=
Prandtl NumberPrandtl Number=

Comment
Post your comment after login/register. LoginorRegister

View source
×