2-methoxyethanol  Thermodynamic & Transport Properties
CAS Number
Name
Category
Pure Or Mix Name
English Full Name
Chemical Formula
Molecular Weight
Synonym Dowanol_EM,2-Hydroxyethyl_Methyl_Ether,beta-Methoxyethanol,M-Cellosolve,2-Methoxyethanol;Ethylene glycol monomethyl ether,Methyl glycol; SOLVENT S; Ethanol, 2-methoxy-; H2O; 2-methoxy-ethanol; dowanol7; Ethylene Glycol Monomethyl Ether; EGM; TAP-WATER; monoethylene glycol methyl ether; MECS; 1-hydroxy-2-methoxy-ethane; ethylene glycol monomethyl ether; Prist; 2-hydroxyethyl methyl ether; O-Methyl Glycol; WATER G; 2-Methoxy-aethanol; Methyl Cellosolve; glycol monomethyl ether; Egme; Ethylene glycol monomethyl ether; 2-Methoxyethanol;
Molecular Weight
Normal Boiling PointNormal Boiling Point
Critical Temperature Critical temperature
Acentric FactorAcentric Factor
Dipole Momentdipole moment
Heat of Formation J/mol
Heat of Combustion J/mol
Composition
2-methoxyethanol :Introduction
Single Value
Calculation Model ：
Based on Mars Model
Temperature =
Pressure =
Specific Enthalpy =
Specific Entropy =
Reference
Please Login before calculating Loginor Register
2-methoxyethanol :Thermodynamic & Transport Properties Calculated Result
Physical State:
Molecular Weight=
Celsius,Fahrenheit,Reaumur & Thermodynamic Temperature ConversionTemperature=
absolute pressure & gauge pressurePressure=
Density=
specific volumespecific volume=
Specific EnthalpySpecific Enthalpy=
Specific Entropy Specific Entropy =
Composition=



Saturated Vapor Pressure, boiling point (dew point), latent heat of vaporizationare are saturated properties, just enter One parameter to calculate them!
Saturated Vapor Pressure=
Boiling Point=
Latent Heat of VaporizationLatent Heat of Vaporization=
Specific Heat at Constant PressureSpecific Heat(Cp)=
Specific Heat(Cv)=
Adiabatic ExponentCp/Cv=
QualityVapor Quality=
Compression FactorCompression Factor=
Thermal conductivityThermal Conductivity=
Thermal Diffusion CoefficientThermal Diffusivity=
Kinematic ViscosityKinematic Viscosity=
Dynamic ViscosityDynamic Viscosity=
Surface TensionSurface Tension=
Prandtl NumberPrandtl Number=

Comment
Post your comment after login/register. LoginorRegister

View source
×